Part Number Hot Search : 
F250TA FM31272 TDA894 LH28F320 CMPZ4708 SXX08DS2 F22V1 BD352P
Product Description
Full Text Search
 

To Download SMA80-1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 cascadable amplifier 10 to 200 mhz rev. v4 a80-1 / SMA80-1 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: z 0 = 50 ? , v cc = +15 v dc parameter units typical guaranteed 25oc 0o to 50oc -54o to +85oc* frequency mhz 5-200 10-200 10-200 small signal gain (min) db 27.3 26.0 25.0 gain flatness (max) db 0.3 0.7 1.0 reverse isolation db 33 noise figure (max) db 2.0 2.5 3.0 power output @ 1 db comp. (min) dbm 16.0 14.5 14.0 ip3 dbm +28 ip2 dbm +33 second order harmonic ip dbm +39 vswr input / output (max) 1.5:1 / 1.8:1 1.8:1 / 2.1:1 2.0:1 / 2.3:1 dc current @ 15 volts (max) ma 30 32 34 features ? high reverse isolation: >32 db (typ.) ? very low noise: 2.0 db (typ.) ? high gain: 27.3 db (typ.) ? high efficiency: 29 ma at 15 volts (typ.) description the a80-1 rf amplifier is a discrete hybrid design, which uses thin film manufacturing proc esses for accurate performance and high reliability. the 2 stage silicon bipolar feedback amplifier design displays impressive performance over a broadband frequency range. an isolation transformer is used in the feedback loop, with the benefit of high reverse isolation. both to-8 and surface mount packages are hermetically sealed, and mil-std-883 environm ental screening is available . product image ordering information part number package a80-1 to-8 SMA80-1 surface mount maam-007844-0ca801 sma connectorized ** absolute maximum ratings parameter absolute maximum storage temperature -62oc to +125oc case temperature 125oc dc voltage +17 v continuous input power +10 dbm short term input power (1 minute max.) 50 mw peak power (3 sec max.) 0.5 w ?s? series burn-in temperature (case) 125oc thermal data: v cc = +15 v dc parameter rating thermal resistance jc 184oc/w transistor power dissipation p d 0.155 w junction temperature rise above case t jc 28oc * over temperature performance limits for part number maam-007844-0ca801, guaranteed from 0 o c to +50 o c ** the connectorized version is not rohs compliant.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 cascadable amplifier 10 to 200 mhz rev. v4 a80-1 / SMA80-1 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. outline drawing: to-8 * ? dimensions are inches (millimeters) 0. 015 (0.38) unless otherwise specified. typical performance curves at +25c outline drawing: surface mount * outline drawing: sma connectorized * weight: 1 gram (0.04 oz.) max weight: 1 gram (0.04 oz.) max weight: 19 grams (0.67 oz.) max


▲Up To Search▲   

 
Price & Availability of SMA80-1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X